Inspection before operation: turn the coupling or shaft by hand to check whether the steering is correct. Whether the operation is flexible. If the disc does not move or there is abnormal sound, it shall be checked and handled in time.
Pump start: open the pump inlet valve and fill the pump with liquid to remove air. Turn on the power and start, pay attention to the current, and open the outlet valve for operation according to the indication of the pressure gauge. In case of abnormal conditions such as abnormal sound and motor heating during operation, stop the pump immediately for inspection.
停車：先關閉出口閥，再切斷電源并及時關閉進口閥。
Shutdown: first close the outlet valve, then cut off the power supply and close the inlet valve in time.
Before the operation of the fan, check whether the lubricating oil or grease meets the requirements of the manufacturer, and the manual turning gear can rotate flexibly. During the operation of oxidation fan, relevant parameters and indexes need to be adjusted according to the operation conditions to meet the production requirements. The cooling fan of air cooler can adjust the operation state according to the local climate change.
The wonderful contents of this article are provided by the knowledge of biogas desulfurization. There are many wonderful contents on this website. You can click to enter more contents: http://www.lhgdst.com We have special customer service to answer your questions
企業二維碼
2022-05-16
魯公網安備37011202000764號號